Friday, 4 February 2011

5-axis CNC vertical machining centre for milling very large workpieces

Friday, February 04, 2011  12 comments

A range of interpolated 5-axis CNC vertical machining centres designed for milling medium, large and very large workpieces across various materials as steel, aluminium, composites and resin.


The Flymill range of machining centres offers four models - 1000, 1300, 1600 and 2000. The main difference between  the models is vertical and horizontal travel – 2,500 mm, 4,000  mm and 3,500 mm – whereas longitudinal travel spans from 2000mm to 8,000mm and over. 
The amply dimensioned table, structural rigidity and operational travel distances allow these machining centres to operate also in a  shuttle configuration. Linear axis speed  is 40m/min and can reach up to 60m/min.  The twist heads, with continuous axis C rotation, axis A rotation from -105° to +120°, rotational speed of 100 rpm and 40 kW electrospindle, guarantee maximum production flexibility and are the ideal solution for complex machining operations. 
A wide choice of high-performing electrospindles is available  with rotation speeds reaching up to 40,000 rpm and continuous torque up to 137 Nm allowing  for continuous  high-speed machining of composite materials, light alloy, steel and superalloys from rough milling  to surface finishing operations. All the electrospindles are thermally stabilised and a purpose software specifically  designed compensates any thermal expansion  and drift  to ensure maximum machining precision in varying operational conditions.  

A wide selection of optional accessories are also available for the Flymill range allowing customers to adapt these machining centres to specific individual requirements.

 The photos show the FLYMILL 1600 of our Customer Pushpak Trademech Ltd while machining large gearwheels for mills and dams.

Here you can find the catalog in PDF format of the range FLYMILL
If you're interested in the Breton FLYMILL machining centre, just drop us a line at mail@breton.it. We'll get back to you promptly.

 Thank you for your interest: we're looking forward to hearing from you.
Bye-bye
Sergio Prior

12 comments:

  1. Unknown30 December 2014 at 07:04

    I didn't know so much equipment went into making gearwheels for mills and dams. It seems like you would really want a specialized company to make this equipment. The equipment required to make these gearwheels seems like it would be really specialized. Can you use the equipment to make anything else? http://www.halesmachinetool.com/service.html

    ReplyDelete
  2. Sergio Prior7 January 2015 at 11:24

    Good morning Rachel Benson,
    here you can find a range of applications about Breton FLYMILL - 5 axes vertical machining centre.
    http://flipboard.com/section/breton-flymill-bqJ0Rg

    Best regards,
    Sergio Prior
    Marketing Manager
    Breton SpA

    ReplyDelete
  3. admin21 January 2015 at 11:49

    nice tools, for more documents on cnc machine

    cnc machine

    ReplyDelete
  4. Sergio Prior26 January 2015 at 10:55

    thanks

    ReplyDelete
  5. Anonymous16 July 2015 at 05:02

    Hi Today I have read your blog posting. It is very informative for us. We like it and it is really nice information about Sinker EDM Machine. we are also same in this field. Thanks for this nice and great information.

    ReplyDelete
  6. Sergio Prior17 July 2015 at 17:32

    Thank you Machinery Source,
    we hope our content will be useful
    Best regards,
    Sergio Prior
    Marketing Manager

    ReplyDelete
  7. Unknown4 April 2018 at 07:54

    This comment has been removed by the author.

    ReplyDelete
  8. Unknown3 May 2018 at 08:43

    Great post!!Thanks for sharing it with us....really needed.TensileMill CNC offers small and large, high speed, machining centers designed to prepare the highest quality flat and round tensile specimens.With our intuitive and user friendly tensile software interface, we make it easy for any operator to control the machining process from start to finish with only a few buttons.Tensile Lathe Sample Preparation

    ReplyDelete
  9. Nathan Robert1 August 2018 at 10:59

    Really wonderful blog post, thanks for sharing such great informative post.Machine Monitoring Software

    ReplyDelete
  10. Nathan Robert23 August 2018 at 11:03

    Very nice article! Thanks for sharing the nice informative post! Vertical machining centre

    ReplyDelete
  11. Gennki Group14 October 2020 at 09:28

    I have read this article twice because of it's amazing writing you can also check

    Very Helpful And Nice Posted Article. This Is Really Useful And Nice Information. I Am Impressed By Your Given Post Of Your Blog.

    Thank You Very Much For Great Post.

    Aluminum die casting

    ReplyDelete
  12. Emily Brown7 October 2021 at 13:21

    While CNC machining has been the way to go for decades at this point, replacing many instances of manual labor, 5-axis CNC machining has been revolutionary. It takes the base concept of CNC machining and adds several layers to bring intricate designs to life.
    MD Design and Automation are providing CNC prototyping, Precision machining cnc and manual, Short run machining, cnc machining wisconsin, machining, EDM Machining,4 and 5 axis machining and electrical discharge machining at their facilities in Wisconsin.

    ReplyDelete